___________________________
  1. Products Products
  2. Thermal Spray Materials Thermal Spray Materials
  3. Ceramic Powder Ceramic Powder
  4. Applications Applications

Ceramic Powder

Carbides for thermal spray coating

Product Material Particle size Application Inquiry
Tungsten Carbide WC-6Co
WC-8Co
WC-10Co
WC-12Co
WC-17Co
WC-20WC
-30+5μm
-45+15μm
-53+2-μm
Higher resistance against oxidation and corrosion.
High toughness and ductility
Dense, hard coating
HVOF, HVAF
Inquiry
Cast tungsten Carbide Powder WC & W2C
W: 95-96%
TC: 3.9+/-0.1%
-5+10μm to
-200+400μm
Cast tungsten carbide is used as reinforcing material for hard facing of petroleum drilling tools, building machines, etc. Inquiry
Cemented Carbide Spay Powder WC-Co,
WC/Cr, W/Co/Ni
-100+200mesh
-325+800mesh
Customized
Used for surface strengthening, protection, repairing. Inquiry
Chromium Carbide Powder Cr3C2
Cr: 84-87
Cr: 88-91
Cr: 78-81
-30+5μm
-45+15μm
-53+2-μm
Coarse crystalline grain
Max operating temp 870℃
Usually blended with metallic material, hard& wear resistance coatings
Inquiry

Other ceramics for thermal spray coating

Product Material Particle size Application Inquiry
Alumina Powder Al2O3, 99.5% -74+38μm
-45+15μm
-30+10μm
-High hardness, excellent resistance to abrasive and sliding wear, corrosion.
- Max operating temp 800℃
-Used as hard face wear, fiber abrasion
Inquiry
Chromium Oxide Powder Cr2O3, 99.5% -74+38μm
-45+15μm
-30+10μm
-Tough, dense, smooth and high hardness, wear and corrosion resistance
-Coating is insoluble in acids, alkalis and alcohol
-Used on pump seal areas, grounds, wear rings
Inquiry
Niobium Monoxide Powder NbO
 
1-4.5μm
 
-Niobium monoxide is a grey solid with metallic conductivity. It is also a superconductor at 1.38 K. So niobium monoxide powder is often used in capacitors for its high capacitance and low ESR. Inquiry
Yttrium oxide powder Y2O3, 99.9% -63+15μm
 
-Stable at high temperatures, heat resistant in aggressive atmospheres
-Used for protection of graphite sheets in the hard metal industry, CVD, ether parts(For In-Plasma)
Inquiry
Titanium Oxide Powder 99.5% -120+45μm
325mesh
-Tough and dense, high bonding strength, protection against high temperature oxidation, resistant to wear by abrasive grains and hard surfaces, moderate abrasive wear resistance
-Soluble in alkalis and sulfuric acid, but resistant to attack in many other environments
-Slightly conductive, static electricity does not build up on the coating surface
Inquiry
Alumina Silicon Oxide Powder SiO2: 28.0   Al2O3: Balance -100+25μm
-90+45μm
-53+15μm
-High temperature resistance, high intensity, small coefficient of thermal conductivity and good resistance to chemical corrosion
-Expansion uniformity, excellent thermal shock resistance
-Load high softening point, high temperature creep value is small, high hardness
Inquiry
Alumina magnesium oxide Powder MgO: 28.0
Al2O3: Balance
-100+25μm
-90+45μm
-53+15μm
-Automobile exhaust gas probe
-Good erosion resistance, abrasion resistance
-Good thermal shock resistance and excellent resistance to spalling
Inquiry
Alumina Zirconia Powder ZrO2: 40.0
Al2O3: Balance
-100+25μm
-90+45μm
-53+15μm
-High toughness
-Good abrasion and erosion resistance
-Used for parts in paper industry, etc.
Inquiry
Alumina Titanium Oxide
(ATO)
TiO2: 3.0%
Al2O3: Balance
-74+38μm
-45+15μm
-30+10μm
-Coatings are smooth and dense
-For use as corrosion, abrasion, erosion and sliding wear resistant coatings
-Typical applications in textile machines for guiding and handing of thread, rolls in paper industry, etc.
-Good dielectric strength at room temperatures, lower dielectric strength than pure Al2O3 coatings
Inquiry
Alumina Titanium Oxide
(ATO)
TiO2: 5.0%
Al2O3: Balance
-74+38μm
-45+15μm
-30+10μm
-High hardness, dense and smooth
Excellent resistance to abrasive wear, sliding wear, erosion, cavitation and corrosion, good insulation
Used as hard face wear, fibre abrasion, particle erosion and high temperature-resistant coatings
Can be used in acidic or alkaline environments
Inquiry
Alumina Titanium Oxide
(ATO)
TiO2: 13.0%
Al2O3: Balance
-74+38μm
-45+15μm
-30+10μm
-Tough, dense and smooth
-Excellent resistance to abrasive wear, erosion, corrosion and fretting
-High dielectric strength
-Used as hard face wear, fibre abrasion and particle eroion-resistance coatings
Inquiry
Alumina Titanium Oxide
(ATO)
TiO2: 20.0%
Al2O3: Balance
-74+38μm
-45+15μm
-30+10μm
-Tough, dense and smooth
-Excellent resistance to abrasive wear, erosion, corrosion and fretting
-High dielectric strength
-Used as hard face wear, fibre abrasion and particle eroion-resistance coatings
Inquiry
Alumina Titanium Oxide
(ATO)
TiO2: 40.0%
Al2O3: Balance
-74+38μm
-45+15μm
-30+10μm
-Tough, dense and smooth
-Excellent resistance to abrasive wear, erosion, corrosion and fretting
-High dielectric strength
-Used as hard face wear, fibre abrasion and particle eroion-resistance coatings -Recommended for applications in the  chemical industry for resistance against weak, acidic environments
Inquiry
Alumina Titanium Oxide
(ATO)
TiO2: 50.0%
Al2O3: Balance
-74+38μm
-45+15μm
-30+10μm
-Good abrasive wear resistance and erosion resistance below 550℃(1020℉)
-Lower wear resistance, better grind ability than coatings containing less titania
-Used in chemical industry and used for thread guides to test abrasive fibers
Inquiry
Alumina Titanium Oxide Fe2O3: 1.0, SiO2: 2.0, TiO2: 2.5, Al2O3: Bal -100+25μm
-90+45μm
-53+15μm
-Wear resistant coating is very hard, has a low friction performance and chemical stability
-Coating with relative stability and high grain hardness
-Applied to heavy duty wear aspect of severely corrosive environment
Pump plunger rod rotating spray pump sea ring
Inquiry
Titania Chromium Oxide TiO2: 40.0, Cr2O3: bal -74+38μm
-53+15μm
-30+10μm
-Used as hard face wear, fibre abrasion, particle erosion, gas and liquid corrosion-resistance coatings
-Used on pump seal areas, grounds, rolls and wear rings
Inquiry
Titania Silica Chromium Oxide TiO2: 3.0, SiO2: 5.0, Cr2O3: bal -74+38μm
-53+15μm
-30+10μm
-Tough, dense and smooth, high hardness, excellent resistance to sliding and abrasive wear, erosion, cavitation and corrosion
-Coatings are insoluble in acids, alkalis and alcohol, good friction characteristics
-Used as hard face wear, fibre abrasion, particle erosion, gas and liquid corrosion-resistant coatings
-Used on pump seal areas, grounds, rolls and wear rings
Inquiry
Yttria Alumina Chromium Oxide Y2O3: 10.0 Al2O3: 40.0 Cr2O3:  bal -53+15μm Plasma spray Inquiry
CaO Stabilized Zirconium Oxide CaO: 5.0%
ZrO2: Bal
 
-90+45μm
-45+15μm
-40+10μm
-Porous coat having good thermal insulation properties, resistant to corrosion, heat and thermal shock
-Used for thermal barrier and gas corrosion resistant coatings
 
Inquiry
CaO Stabilized Zirconium Oxide CaO10.0/ZrO2 -90+45μm
-45+15μm
-40+10μm
-Thermal barrier and erosion resistant coatings
-Used for furnaces and casting ladles
 
Inquiry
Yttira Stabilized Zirconium Oxide YSZ (Y2O3: 3, 5, 8mol) -90+45μm
-45+15μm
-40+10μm
-Coatings exhibit good chemical and thermal stability, tough and dense, excellent resistance to thermal shock and particle erosion at high temperature, good insulation
-Used as thermal barrier coatings for turbine combustion liners and airfoils, hot gas corrosion protective coatings
Inquiry
Yttria Ceria Stabilized Zirconium Oxide YCSZ (Y2O3: 2.5, CeO2: 25, ZrO2: bal) -90+45μm
-45+15μm
-40+10μm
-Coatings exhibit good chemical and thermal stability
-Tough and dense, excellent resistance to thermal shock and particle erosion at high temperature, good insulation
-Used as severe thermal barrier coatings in greater high temperature and hot gas corrosion protective coatings
Inquiry
MgO Stabilized Zirconium Oxide MSZ (MgO: 24.0, ZrO2: balance) -90+45μm
-45+15μm
-40+10μm
-Used as thermal barrier coatings for turbine combustion liners and airfoils
-Particle erosion and hot gas corrosion protective coatings
-The molten metal protection coatings
Inquiry
AZO Powder ZnO: AL2O3=98:2 wt%,
Purity: 99.9%
-74+38μm
-45+15μm
-30+10μm
-Rotatable sputtering target or cylindrical sputtering target
-Sputtering Plane target
Inquiry
ITO Powder In2O3:SnO2=90:10 wt%
Purity: 99.99%
10~30μm
(Yellow powder)
20~80μm
(Blue powder)
-Used for spray rotatable sputtering target or cylindrical sputtering target Inquiry
Tin Oxide Zirconium Oxide Powder Customized -74+38μm
-45+15μm
-30+10μm
-Conductive ceramic film
-Rotatable sputtering target or cylindrical sputtering target
Inquiry

Please send your request to sales@edge-techind.com if the material is not listed.

Edgetech Industries LLC741 Ranch Road, Weston, FL 33326 USAsales@edge-techind.com