___________________________
  1. Products Products
  2. Thermal Spray Materials Thermal Spray Materials
  3. Composites Powder Composites Powder
  4. Applications Applications

Composites Powder

We provide kinds of composites powder for thermal spray coating

Product Material Particle size Application Inquiry
Titanium Carbide Nickel Composite Powder 99%, TiC-Ni, Customized composition 15-50μm,
etc.
-Wear-resistant coating Inquiry
Nickel Clad Aluminum Composite Powder Ni20Al, Ni5Al -140/+325
mesh
-HRC~20, Working temp. <800℃
-Exothermic coated Powder, high bonding strength, oxidation resistant
-Manufacture and repair blades of engine and metallurgical fan
Inquiry
Nickel Clad Molybdenum Composite Powder Ni22MoS2 -140/+325
mesh
-HRC~20, Working temp. <500℃,
-Wear reducing material, Good lubricity, Oxyacetylene flame coating
-Used for a low friction ring, low friction material, movable seal parts.
Inquiry
Nickel Clad Graphite Powder Ni25C, Ni50C -140/+325
mesh
-HRC~20, Working temp. <480℃
-Low hardness, good lubricity.
-Oxyacetylene flame coating, can be used surface spray for a low friction ring, aircraft compressor Parts, movable seal parts.
Inquiry
Nickel Clad Aluminum Composite Powder Ni23Al2O3 -140/+325
mesh
-HRC~40, Working temp. <800℃
-High hardness, good wear resistance
-Used as bonding layer for Al2O3 spaying
Inquiry
Nickel Clad Tungsten Carbide Powder WC12Ni -140/+325
mesh
-HRC~62, Working temp. <400℃
High hardness, good wear resistance, wear-resistant coating
-Used for thermal power plant fan, flue putter wear coating
Inquiry
Cobalt Clad Tungsten Carbide Powder WC12Co
WC17Co
WC25Co
-325/+500
mesh
-HV0.3 800-1300, Working temp. <540℃
-Hard and dense coating with excellent grain wear and abrasive wear resistance
-Higher Co content, higher toughness
Inquiry
Cobalt Chrome Clad Tungsten Carbide Powder WC10Co4Cr -325/+500
mesh
-HV0.3 1000-1300, Working temp. <540℃
-Better corrosion resistance than WC-12Co, but similar were resistance 
Inquiry
Nickel Chrome Clad Chromium Carbide Powder 20NiCr-80Cr3Cr2 -325/+500
mesh
-HV0.3 900-1100, Working temp. <850℃
-Spaying for rower plant boiler tubes, metallurgic-roll, core metallurgic-roll, petroleum shaft.
Inquiry
Nickel Chrome Clad Chromium Carbide Powder 25NiCr-75Cr3Cr2 -325/+500
mesh
-HV0.3 800-1000, Working temp. <850℃
-Hard & dense coating, ideal coating for wear resistance, oxidization resistance and corrosion resistance at high temperature.
Inquiry
Nickel Chrome Clad Chromium Carbide Powder 30NiCr-70Cr3Cr2 -325/+500
mesh
-HV0.3 800-1000, Working temp. <850℃,
-Lower hardness then Cr3C2-25NiCr, better toughness
Inquiry
Self-bonding Tungsten Carbide Powder Al:3.0, Cr:6.0,
B:1.0, Si:1.5, C:0.5,
Fe:1.5,Co/WC:50.0,
Ni: Bal
-140/+325
mesh
-HRC-40, Working temp. <550℃,
-Excellent coating bonding strength, sued for both working coating and bonging coating
Inquiry
Nickel Chrome Aluminum Powder NiCr5Al -140/+325
mesh
-HRC-20, Working temp. <800℃,
-Excellent bonding coating and oxidization resistance coating at high temperature
Inquiry
NiCoCrAlY Yttria Composite Powder NiCoCrAlY-Y2O3 -140/+325
mesh
-HRC-20, Working temp. <800℃,
-Excellent bonding coating and oxidization resistance coating at high temperature
Inquiry

Please send your request to sales@edge-techind.com if the material is not listed.



EdgeTech Industries LLC16518 SW 36th St, Miramar, FL 33027sales@edge-techind.com